Printable View
Have you done it? I've got a kit to do it, but I'm a little apprehensive. I'm sure it'll be fine, but I really don't wanna fuck up my sensor. Any suggestions? Any good tutorials out there? Yeah, I know google is my friend, but fuck it, Mags are cooler.
TIA.
The Giotto rocket blower thingy works for me. I have the small one and it fits in my Pelican case along with everything else. Don't leave home w/o it.
80 grit sandpaper or steel wool
^what he said
The sensor is covered by a soft piece of glass that is fused to the sensor itself.
Clean it like you would a soft piece of glass and you will be fine.
That being said, 95% of the time a good puff of air has taken care of the 'dirt' on my sensor. Try that before you do a wet clean..
Get the Giotto rocket blower. Try it first. I've heard about problems with other blowers spewing out junk. Stick with the Giotto.
80 grit sandpaper FTW!!!!
Thanks for the heads up guys. The kit I have is a wet clean kit, but I definitely would feel better using compressed air.
In order:
-air
-brush
-wet clean with high grade isopropanol
-wet clean with high grade acetone
the sensor is covered with an anti-alias filter, a coated piece of glass. Reasonably robust as those things go. If you fuck up the filter, or want an IR camera, you can buy replacements here:
http://www.lifepixel.com/shop/cart.php
Quote:
Originally Posted by pbourdon
You don't want to use compressed air. Stick with the rocket blower.
Right on...thought they were the same thing. Haven't ordered/bought either yet.Quote:
Originally Posted by Todds
1) Spray
2) Swipe
3)Pray
4)Send to Canon
Say, do you have the address for Canon? Since I got a Nikon, it didn't come with Canon's sensor cleaning service address. I'd really appreciate it.Quote:
Originally Posted by supermodel159
It's really not that bad. I use two different methods.
First, I pretty much use a Giotto Rocket once a week. I have found that if you stay on top blowing off your sensor you don't need to swipe it with a wet kit as often.
But, the time comes when the Giotto just doesn't cut it. Then I use the Copper Hill cleaning kit. http://www.copperhillimages.com/index.php?pr=tutorials
The key with cleaning you sensor is that you are in a place where it won't get more dust on the sensor while cleaning. No fans, closed windows/doors, no dogs, clean table, clean hands. Seriously, I wear latex gloves so that I don't get any oil on the PecPads.
I have a static brush too, but have found that a Giotto blower works as well as the brush.
Finally, I have heard mixed reviews about Canon's cleaning service. A few people have told me that their sensor came back dirtier than it was before they sent it in. Personally, I think that sensor cleaning is far too common (and easy) to need to send away to Canon.
Thanks for the heads up on the Giotto to all that recommended it. Got mine today and it looks like it did the trick. For what its worth, I should have some pics up from the second portion of my [ame="http://www.tetongravity.com/forums/showthread.php?t=199104"]summer trip[/ame] soon. School has started though, and free time isn't what it was a couple of weeks ago.
Last semester though, and then its on to CO!
This shit freaked me out. Seriously? Once a week. Seems like everywhere else I've ever seen recommends you stay the hell away from the sensor unless there's an emergency. Wow. And you're like, a pro and shit.Quote:
Originally Posted by aj_77
They tell you not to touch it. The Rocket just blows air on it - no scratches.
Seriously - if you don't have one of these get it immediately.
http://media.the-digital-picture.com...Air-Blower.jpg
BTW, in case it hasn't been mentioned yet/before: the reason the Rocket is better than compressed air is because the canned air gets COLD when it expands (is used.) That cold can actually damage your sensor and the coatings on the glass protecting the sensor if you don't know how to use canned air - short quick puffs.
I also use a Lenspen Sensor-Klear when shit just gets too stuck for the blower. If you have a light touch this thing works wonders:
http://www.the-digital-picture.com/I...nsor-Klear.jpg
It's basically the same as the standard Lenspen except with a triangular head (vs Round) to get into the corners.A quick swipe with that thing followed by a few puffs from the rocket and you're done. No liquids to spill, no swabs to keep dust free/clean/tote. Me likey.
dont trust myself with not fucking up my sensor...worth the $60 to take it in for a cleaning by someone that knows exactly what they're doing.
But my camera does that vibrating thing. Isn't that supposed to clean it?
I don't think you can do any harm with the rocket blower. Just follow camera instructions for locking the mirror up and blow.Quote:
Originally Posted by Mathematics
Lenspen rocks. Went into the shop recently for the smaller version, and was told they don't sell them on purpose because they don't trust their clients to use them properly. Or they're going for the service fee, but they didn't say that...Quote:
Originally Posted by Tippster
Although I did recently get a dslr, I still have my p&s canon sx210is that's great for super small packable to take acceptable pics for memories vs super high end photos. I think I probably bought it for a bit under $300, and have about 15,000 clicks on it. Appears to have dust on sensor, or inside of lens. Called local reputable camera shop and they said they would clean it for $75, but said the screws are epoxied in and it's kind of a chore and a little risky. Said I might want to just put the money towards a new p&s. Ideas?
Pay them
Just deal with spots and remove in photoshop if super nice image
Try to fix it at home