User Profile

[noslow]

The above picture with measurements and profile front that site are always great as they show the min side cut width/side cut center on skis along with the rec mount point. Never measured my MFree 112 but would have guessed it was right around that -6.5cm to -7cm range and see it’s actually-7cm back...

[noslow]

Just looked at new Hot Shot construction differences on their website and definitely will be dropping dampness and stability on the new design.
Should be easier to ski at lower speeds with it’s new tighter radius but bet the lighter fibreglass, wood core, edges and bases will sacrifice stiffness...

[noslow]

Mine were around -3.25ish on both the 184cm SF 110 and MF 112 but the MF 112 were off a bit between the left and right set. Just measured back -6.25 total on the MF 112 and had them mounted there.

As long as you’re on Pivots, you’d still be fine to mount at -7cm total back. Bet the...

[noslow]

The SF 110/MFree 112 ski great at -3cm/-6cm total back and a nice increase in float and stability over the rec line. A longer turn radius and more symmetrical side cut in the MF 112 vs MF 108, so could be a bit more forward on the MF 112 mount for a similar feel.

Have noticed the SF 110/MF...

[noslow]

I’m a fussy guy about my ski tunes , so the stone grind on new skis is just an assumed step for me now. Thankfully Corbetts is very good for doing them before their free binding install(when you buy from them) on their Wintersteiger Jupiter for $25 CAN or sometimes free if they are obviously off....

[noslow]

If you liked the way the 99 skied on the line then do the same on the 104. The 104 will be even more stable yet more playful than the 99 was. You’ll love them!

Unfortunately, I’ve had to grind every new ski I’ve got in the last 10 years to ensure it’s perfect but the improvement...

[noslow]

The 26 191cm 104 I bet would be almost identical in flex and very similar in weight to your 104 Free but with a hair less tail rocker(2cm ish) and you’d only have to move the mount up .5cm on the new ski. Wouid float and feel similar to your current 104 Free but again more solid on edge but still...

[noslow]

Remember taking this pic when picking up my 185cm E104 from Corbetts. This is the weight of a pair of 25 191cm E104.

...

[noslow]

The previous Enforcer 100 and narrower were always a bit more forward a mount(about -8cm) vs the almost -9cm of the E104 Free. So the new Enforcers are around -7.5cm now in the 185cm lengths with the rocker reduced on most models(99 has similar rocker but more tail splay now though).
The Enforcer...

[noslow]

The beauty of the new Enforcer line is they slightly scale the dimensions narrower when going down in lengths so that even smaller, lighter skiers will get more stable skis now.

In the case of the old 186cm 104 Free, it did not like going straight at speed(even 40mph) and wanted you to...

[noslow]

They reduced the width of the metal sheet width to lighten the weight a hair of all Enforcers in 25 but increased the cores in thickness to stiffen them a bit. Also added rubber underfoot and got rid of the carbon stringers. The E 104 flex changed the most in the line over the 104 Free so it’s more...

[noslow]

Noticed the 2026 Enforcers 104 were weighing 100gr plus a ski less a ski on SkiEssentials videos this Fall along with the website weight specs being lowered too. Not a big fan of the 26 graphics either so decided to get a backup set of the 25 179cm Enforcer 104 at huge discount. My set over 2200 gr...

[noslow]

This year’s graphics are like REALLY uninspired but last years look decent with bolder binding colours.

185cm E104 with yellow Attacks and 179cm E 104 for tighter treee for my 175lbs with white bindings. ...

[noslow]

The new Enforcer 104 is your ski then! Actually even more stable with a bit longer radius than the 99 along with more weight and tail splay/rocker. Destroys crud and very solid on edge with the 2 sheets of metal and nice and damp with no carbon and rubber underfoot.

Had the old 186cm Enforcer...

[noslow]

Those Dynastars are the Troublemaker graphic which I had 2 sets of back in the day. One pair was metallic paint that looked insane in the sun. Would love that graphic again! If it has the stiffer tip/tail of the BO 118/SF 118 with the PU core it might be even more damp than the BO 118 and quieter than...