Garmont 7tm. Why have you left us?

Collapse
X
 
  • Time
  • Show
Clear All
new posts
  • uglymoney
    Registered User
    • Jul 2005
    • 8174

    #1

    Garmont 7tm. Why have you left us?

    I spend most of my days telemarking. I never spent any time reading TT or hanging with other tele boarders because I don't really care and nobody really comes around Chestnut to tele that is worth a damned. It is just something I do to keep it fun in the midwest. But now I'm wondering what I do if my 7tm's break? NTN looks terrible and I have been told they're a debbie downer for guys like me that get real low.

    Is there any other choice for releasable binders that work? Will NTN work with my T1's?

    School me.
  • Meadow Skipper
    Me encanta el país alto
    • Dec 2005
    • 16764

    #2
    Originally posted by uglymoney
    Is there any other choice for releasable binders that work? Will NTN work with my T1's?
    I don't think so, and no. I believe they stopped making Voile CRBs. Maybe adrenelated or some other shop rat will chime in. But your T1s will definitely not work in NTN.

    NTN has been good to me. I had to tighten and raise my stance, but those were good things. More pimping available on request.
    I’m shining like a new dime

    Comment

    • uglymoney
      Registered User
      • Jul 2005
      • 8174

      #3
      Thanks Bob - that is what I was afraid of. Took me an entire season to get the T1's to blow out and fit perfect and now I'm one breakage away from boot and binding shopping. $$$$$.

      Comment

      • dcpnz
        Registered User
        • Nov 2010
        • 1498

        #4
        Uglymoney,
        I've got your back on this one!
        I've got a few pairs of 7tm sitting in the garage. Variety of different models/vintages. PM me if you need spares now or in future and we can figure something out.
        Last edited by dcpnz; 10-19-2013, 09:36 AM.

        Comment

        • jamesp
          Registered User
          • Oct 2008
          • 1968

          #5
          I have some of those Telebry release plates that I don't use (I'm back on AT gear). Will sell for cheap.

          Comment

          • gregL
            User
            • Dec 2010
            • 5611

            #6
            Telemark Tech System. But it won't work with your T1's.

            http://www.randosaigai.com

            Comment

            • Meadow Skipper
              Me encanta el país alto
              • Dec 2005
              • 16764

              #7
              Originally posted by gregL
              Telemark Tech System. But it won't work with your T1's.

              http://www.wasatchski.com/tts.htm
              Not releasable.

              Originally posted by jamesp
              I have some of those Telebry release plates that I don't use (I'm back on AT gear). Will sell for cheap.
              I was trying to remember the name of those things to see if they were still made. I set up some back in the shop days, seemed fairly legit...at least as good as 7tms.
              I’m shining like a new dime

              Comment

              • RootSkier
                Jack A. Orseoff, Esq.
                • Nov 2005
                • 13817

                #8
                I've got fuck loads of 7tm full sets and parts. Regular, power, and power tour. What do you need? It's all available.

                Comment

                • uglymoney
                  Registered User
                  • Jul 2005
                  • 8174

                  #9
                  Originally posted by dcpnz
                  Uglymoney,
                  I've got your back on this one!
                  I've got a few pairs of 7tm sitting in the garage. Variety of different models/vintages. PM me if you need spares now or in future and we can figure something out.
                  Sweet. I'm busy setting our family up for the winter - so let me gather myself here and I might take a pair off of your hands.

                  Originally posted by RootSkier
                  I've got fuck loads of 7tm full sets and parts. Regular, power, and power tour. What do you need? It's all available.
                  Ditto above. I knew you were a former 7tm user that quit for fixed heals but I didn't know you were still holding.

                  Shaking the trees works sometimes I guess.

                  Originally posted by jamesp
                  I have some of those Telebry release plates that I don't use (I'm back on AT gear). Will sell for cheap.
                  I have some plates on some old skis with some of the really old Raineys bolted to them. Decent setup but I like the 7TM much better overall probably mostly because those old bindings didn't give much forward pressure. Not sure if they are the same plates.

                  Comment

                  • BFD
                    Registered User
                    • Apr 2004
                    • 3871

                    #10
                    Was there ever a piece of tele gear around longer than a couple of years.
                    off your knees Louie

                    Comment

                    • Hugh Conway

                      #11
                      Originally posted by BFD
                      Was there ever a piece of tele gear around longer than a couple of years.
                      That didn't completely suck ass? No.

                      Comment

                      • Meadow Skipper
                        Me encanta el país alto
                        • Dec 2005
                        • 16764

                        #12
                        Originally posted by BFD
                        Was there ever a piece of tele gear around longer than a couple of years.
                        Originally posted by Hugh Conway
                        That didn't completely suck ass? No.
                        Even the ones that were around for more than a few years pretty much suck ass. Or is that what you said? I'm confused.
                        I’m shining like a new dime

                        Comment

                        • jamesp
                          Registered User
                          • Oct 2008
                          • 1968

                          #13
                          Originally posted by Meadow Skipper
                          I was trying to remember the name of those things to see if they were still made. I set up some back in the shop days, seemed fairly legit...at least as good as 7tms.
                          yeah they worked well. I had BD & Hammerheads on them, never any problems. I only stopped using them because tele was hurting my knees too much.

                          Comment

                          • swerishel
                            Registered User
                            • Dec 2012
                            • 3

                            #14
                            jamesp...check your PMs about the telebrys

                            Comment

                            • dschane
                              Registered User
                              • Jan 2012
                              • 1160

                              #15
                              Originally posted by uglymoney
                              But now I'm wondering what I do if my 7tm's break?
                              Well, if you haven't been convinced to try something else, 7tm bindings and accessories appear to be alive and well-stocked on Telemark-Pyrenees:

                              http://www.telemark-pyrenees.com/en/...ne-telemark/f/

                              Comment

                              Working...