FS: FKS/Pivot Bindings: Used complete sets, and parts, mix-and-match

[Vitamin I]

OFFER YOUR EXTRA FKS PARTS TO EVERYONE ELSE:
- Please hijack this thread to offer your parts (half-moons, AFD’s, brakes, the metal ring with arms, etc.) to help all maggots complete their full pairs.

UPDATE 9/2021: Look/Rossi has made it easy to buy parts at wholesale prices direct from them (USA).

From https://www.tetongravity.com/forums/...55#post6418055 :

Yo. Don't spend $100+ on brake assemblies, just call Rossi service @ 435-252-3300, tell them what you need. They sell parts wholesale to consumers--you don't need to be a dealer. Brake assemblies are $50/pair, any size + ship. Alpine AFDs are $7/pair + ship.

Do them a favor and have the part numbers you need handy, and tell them how much you love their product + thanks for providing this excellent service.

-------

ORIGINAL POST:

VITAMIN I’s SALE
By donation: Any money or metal Salomon bindings will support my upcoming Ski Lending Library & gear data website…or donate bacon, etc. UPDATE: I also need DVDs (or just video files) for ski movies "Immersion" & "There's Something About McConkey".

*** NOTE: NOT SURE IF SHOPS ARE WILLING TO MOUNT SOME OF THE OLDER MIXED-&-MATCHED PAIRS BELOW.

Priority given to buyers of a complete pair, but I encourage you to assemble your “custom” complete pair by mixing-&-matching any of my toes, heels, AFD’s, metal vs. plastic half-moons, etc. First come, first served for mixing-&-matching.

I will custom bend brakes to any width.

--------

Here's what's left after the pre-sale to previously-promised buyers:

1) SOLD to Norseman (plus more small parts) for $125 donation. (Starving students etc. should feel free to donate lower than that range.)
Silver&Black 14 heels, metal half-moons. Nicest old-style 15 metal toes with “not-strictly-compatible” new-style AFD’s


2) SOLD to Teenaged for a hookup-price donation.
Orange 14 heels, plastic half-moons, NOTE: LOOKS LIKE SHARPIED ORANGE-ISH SCRATCHES WILL TURN WHITE AGAIN AFTER MORE USAGE. Matching orange 14 plastic toes with extra-wide AFDs, NOTE: STRANGE COLOR FADING ON WINGS OF THE ORANGE TOE PIECE ON THE RIGHT IN PHOTO.


3) SOLD to Del_The_FH for $80 donation.
Gray-ish silver 14 heels TT9.0, plastic half-moons, NOTE: THE OLDER DESIGN WITH RUBBER PADS. NOTE: MISSING 1 PLASTIC FILLER PIECE WHERE ARM MEETS DILDO. DOES IT MATTER? Silver&black 14 plastic toes with extra-wide AFDs.



4) SOLD to nwslider for $100 donation. (Starving students etc. should feel free to donate lower than that range.)
DarkGray 12 heels TT8.0, plastic half-moons, NOTE: THE OLDER DESIGN WITH RUBBER PADS. Black 12 plastic toes with extra-wide AFDs. (I will re-bend that bent brake properly, or will replace that brake for buyer.)


5) SOLD to J_Berg for $75 donation.
Black&Gold 12 heels, UPDATE: new config of better parts (no longer includes outdated rubber pads), includes 2 good PLASTIC half-moons, buyer's who hate red tab on heel (pictured) may substitute white tab part instead (not pictured). Matching Black&Gold 12 plastic toes with choice between extra-wide teflon AFD's or wide slider AFDs. Buyer may choose higher DIN toes way down below, but colors won't match as well.


6) Non-FKS old Pivot14 (Rossi Scratch) matching set, with super-thin ~1.5mm rubbery shock-absorbing heel shims, toes have slider AFDs. Maroon& Blue.


7) Extra Pairs of Toes & AFD’s to Mix & Match above (all plastic toes are free, all AFD's free except extra-wide teflon ones)

- 7A: Minty old DIN=14 plastic toes: Rossi "FKS Course" w/narrow slider AFDs. Is this style called "Geze"?


- 7B: TOP ROW: DIN=14 plastic toe pairs
2ND ROW: DIN=12 plastic toe pairs
3RD ROW: AFD pairs for plastic toes (wide sliders, narrow sliders, narrow static pair that needs replacement teflon/delrin)
4TH ROW: Lifter/shim pairs for plastic toes (rigid ~9.5mm lift, thin semi-cushy shock absorber, rigid ~6mm lift)


- 7C: DIN=11 plastic toe pairs


- 7D: AFD pairs for UNKNOWN toes w/58mm wide teflon. Their only possible use is they might work for metal "ZR" toes (TBD)---if we prove they don't fit ZR, then I will throw in the garbage. (I already proved they have WAY too much vertical gap for new-style & old-style metal FKS toes, and won't interface well with plastic toes).


- 7E: SOLD to 1000-oaks (for $24 shipped + a donation)
Old-style DIN=15 metal toes, no AFD's included.


8) Extra Single FKS Toe & AFD’s parts (free, except metal toes & extra-wide teflon AFDs)

- 8A: SOLD to Del_The_FH for $30 donation.
single 18 toe (orange, new-style toe, with new-style AFD)


- 8B: Plastic Toe Parts
TOP ROW: DIN=14 plastic toe single
2ND ROW: DIN=12 plastic toe single
3RD ROW: DIN=11 plastic toe singles
4TH ROW: AFD singles for plastic toes (extra-wide teflon, wide slider, narrow static that needs replacement teflon/delrin)
5TH ROW: Lifter/shim single for plastic toes (rigid)


- 8C: More Plastic Toe Parts
TOP ROW: DIN=14 plastic toe single NOTE: BROKEN WINGTIP.
2ND ROW: DIN=12 plastic toe single


9) Extra Single FKS/PX Heel parts (free, except whole heels, dildos, & wide brakes)

- 9A: SOLD to sgsbet86 for $20 donation.
Green DIN=14 dildo single


- 9B: The cracked metal one is AVAILABLE. 5 were SOLD to Norseman, Teenaged, & sendforscience.
TOP ROW: 1 metal half-moon, 4 plastic half-moons
2ND ROW: 1 bad metal half-moon, NOTE: WITH CRACKS THAT WILL WORK SHORT-TERM, BUT WILL FAIL SOON.


- 9C: PX Heel parts
TOP ROW: 3 single PX brakes (70mm fits PX15 or 18, 100mm fits PX12/demo, 120mm fits PX15 or 18)
2ND ROW: single metal PX15 "CoreUpt" branded (769g w/o brake), single metal PX18 "Rossignol" branded (969g w/o brake, SICK!!!)

COMPATIBILITY & COSMETIC DAMAGE BELOW


-9D: FKS Heel parts
TOP ROW: 4 partial heel assemblies (each needs only 1 dildo, 1 half-moon, bend the 75mm brakes, maybe a few screws)
2ND ROW: Same...4 partial heel assemblies (each needs only 1 dildo, 1 half-moon, bend the 75mm brakes, maybe a few screws)
3RD ROW: 3 bottom metal plates, 3 metal ringtop thingies with 3 plastic ring liner thingies, 2 brake springs, 2 fwd pressure indicator tabs w/springs.
4TH ROW: 95mm brake, 75mm brake, 2 broken carcasses containing a few good parts/borderline parts/&destroyed parts.


-9E: FKS Dildo Contents DIN=9


10) Misc used screws for FKS, tell me what lengths you need


.

[Vitamin I]

Reserved for...

Currently hosting images here for links in some PM's.










.

[auvgeek]

Long shot, but do you have any of the toe lifter kits (plates + screws)? Especially the longer screws for the 155?

[jdadour]

Long shot, but do you have any of the toe lifter kits (plates + screws)? Especially the longer screws for the 155?

2nd dibs. I am also interested in a set of toe lifter kits with screws. THANKS!

[1000-oaks]

I'm interested in the guts of a 155 toe, just the spring/spacers or whatever is in there basically. Or just an old 155 toe I can use for parts if you've got one.

[Norseman]

I'd like to get in line for a complete set of solid 18's (or 15's if you have em) with 105mm+ brakes, plus a couple of half-moons... please.

[Vitamin I]

Long shot, but do you have any of the toe lifter kits (plates + screws)? Especially the longer screws for the 155?

Not sure yet. Definitely none came with any of my metal toes (DIN=18 & 15). So if I have any at all, they would have come with plastic toes (DIN=14 & 12), and might possibly be compatible with the metal 155 toes. I will verify inventory of all little parts & screws after I first give priority to buyers of complete sets.

Note to self: Toe lifter screw lengths are at https://www.tetongravity.com/forums/...02#post3771702

.

[Vitamin I]

I'd like to get in line for a complete set of solid 18's (or 15's if you have em) with 105mm+ brakes, plus a couple of half-moons... please.

Sweet. Your spot in line is reserved. At 9am you'll see you might have to mix & match weird stuff, like maybe Rossi DIN=14 heels (exact same as 15 heels except a 14 spring & 14 DIN-scale markings) and maybe Coreupt-branded or Dynastar-branded DIN=15 toes, or whatever.

.

[Vitamin I]

I'm interested in the guts of a 155 toe, just the spring/spacers or whatever is in there basically. Or just an old 155 toe I can use for parts if you've got one.

I have a single DIN=18 toe if that helps, but all my 155 toes are paired up. ...But I guess we could end up splitting up a pair of 155 toes if it seems "best" for the community overall (like if another maggot also needs a single 155 toe to achieve something SICK, like to get a Volant Spatula back on the hill again, haha...or whatever).

.

[Norseman]

I plan to be out in the mountains at 9am tomorrow.

How about you put together and set aside a solid-toe package that you're stoked on, and I'll get back to you in the evening (or Saturday if my shit goes long). I won't get picky, unless the stuff is beat beyond reason.

Thanks

[TAFKALVS]

Long shot, but do you have any of the toe lifter kits (plates + screws)? Especially the longer screws for the 155?

2nd dibs. I am also interested in a set of toe lifter kits with screws. THANKS!

I have 2 sets NIB if interested. By all means buy Vitamin I's first, not trying to steal his sale.

[sendforscience]

In line for a couple half moons as well

Sent from my Pixel 2 using TGR Forums mobile app

[PlayItLeo]

If you’ve got any wide brakes, I’ll jump in line.


Sent from my iPhone using Tapatalk

[altacoup]

I’m in the market for 1 complete heel piece. 18 preferred, brake size doesn’t matter.


Sent from my iPad using TGR Forums

[Vitamin I]

OK, the sale is now up in the edited first 2 posts, now open to everyone.

.